Nanjing thick sheet blister: thick sheet blister production and manufacturing safety operation procedures
Time: 2020-10-12
Turn on the switch power supply and check whether the power switch of electric heating delay time is turned on. It is important to pay attention to the fact that the power switch for electric heating delay time should be turned off when the lower die is applied. On the contrary, if there is no need for a lower die, the electric heating time delay should be defined according to the thickness of the die shell and the rate of rise of the upper die.
When Nanjing thick plastic suction starts, it is necessary to check whether the motors of the mechanical pump and the air compressor are in good condition. As the function power switches on the actual operation table are turned on one by one, it is necessary to check whether everything is normal in operation of the function power switches, whether the heating tube lamp is on, and whether everything is normal. Once the abnormal phenomenon is found and cannot be solved by oneself, it should be conveyed to the team leader or production manager for harmonious handling.
In the process of plastic absorption of thick films in Nanjing, if there is any problem with the mold shell, or if there is any problem with the film, or if there is a problem with the lower mold coming out of the mold, it is necessary to shut down the machine for maintenance. Do not extend your hands or the top of your head or part of your human body into the forming frame to prevent the power switch from malworking and causing safety accidents.
In addition, if the finished product needs to be manually pulled out of the frame area, the hand must be placed outside the cutter. In the process of Nanjing thick sheet plastic forming, if there is any abnormality in the equipment, the actual operation staff must shut down for inspection. If they cannot control their own maintenance, they must immediately report to the team leader or production manager and handle it harmoniously.
The actual operation vitality of Nanjing thick sheet blister forming should be centralized, and several people are prohibited from actually operating a piece of equipment with each other, so as to prevent the power switch from being pressed by mistake, and to concentrate on the work of dividing dishes, so as to ensure one person and one machine as much as possible.
Key words: Nanjing thick sheet blister, Huaian thick sheet blister
Yangzhou Tuobo Plastic Industry Co., Ltd
E-mail:tuoboxisu@126.com
Address: Dinghuo Town, Jiangdu District, Yangzhou City
Mobile website QR code