Taizhou thick blister of the operation process of a brief introduction?
Time: 2020-08-07
Taizhou thick sheet blisterThe production process starts from the production and processing of the mold. The first blister mold is made according to user requirements or sample standards. Under normal circumstances, plastic packaging molds are made of plaster, but wood carving and metal carving products are also used as molds.
After the gypsum mold used in Taizhou thick sheet blister process is made, it is naturally drilled or thoroughly dried, and then according to the specific situation of the concave and convex surface of the product, a 1-2mm drill bit is used to drill many small holes in the depression that does not affect the appearance of the product packaging. If it is a product, such as a packaging tray blister, it is necessary to drill some small holes around so that air can be pumped out when the blister is produced. After drilling holes in the mold, the plaster mold must harden. The hardening treatment method is to soak the gypsum model in a concentrated alum solution and then dry it. Taizhou thick sheet blister mold processing After drilling thoroughly, the mold is installed on the upper iron plate of the vacuum chamber. Then, according to the size of the mold, the plastic plate is loaded into the applicable standard size. Put the board into the heated wooden cabinet and fix it thoroughly, and then put the wooden cabinet and plastic board into the constant temperature furnace for softening treatment.
WhenTaizhou thick sheet blisterWhen packaging, it is necessary to put the softened plastic sheet in the vacuum chamber together with the wooden box, and activate the suction switch to suck the air in the vacuum chamber. After the plastic sheet is cooled, the same concave package or process mold as the mold can be obtained.
To sum up, it is aboutTaizhou thick sheet blisterI hope you can learn more about the introduction of the above-mentioned small series.
Key words: Thick sheet blister, Taizhou thick sheet blister
Yangzhou Tuobo Plastic Industry Co., Ltd
E-mail:tuoboxisu@126.com
Address: Dinghuo Town, Jiangdu District, Yangzhou City
Mobile website QR code