What are the problems in the process of large thick sheet blister?
Time: 2023-02-01
What are the problems in the process of large thick sheet blister?
In the large thick sheet blister processing process, the production of the product has the following steps, to understand it.
1. Thick sheet blister hanging line: During the thick sheet blister process, due to the height and width of the template, viewing angle, demoulding structure and other reasons, the edge of the product will have a wire frame bulge, which will cause harm to the appearance if it is serious, and will generally be treated as defective products. solve.
2. Tone: Tone differences generally appear in the spices of plastic board manufacturers. Different batches of plastic boards may have different background color differences, but this situation is not easy to cause great harm and cannot be distinguished when packaged separately. Therefore, this situation should be communicated with plastic board manufacturers.
3. Thick bubble hole: in the whole molding process, due to the uneven thickness of raw materials, temperature control is not stable, there will be holes, hole products are generally regarded as defective, can not be out of the warehouse.
4. Scratches: The blister surface of the thick sheet is prone to scratches and abrasions. During the processing and packaging process, if it is not handled properly, the surface of the blister product will be scratched, leaving traces, and it will become a defective product in severe cases.
5. Deformation: The key reasons for the plastic deformation of thick plates are temperature adjustment, raw material bubbles, residues, etc., which will cause the deformation of the absorption month, cannot be absorbed in time, and cannot meet the requirements of the absorption month forming, so that the packaged items cannot be put in. Become a defective product.
6. Waviness: The key lies in the processing of plastic sheets. Waviness on the surface of PVC plastic sheets is a relatively common phenomenon and is generally acceptable. Large corrugations will waste high-quality packaging and become inferior goods, which can only be improved according to plastic sheet manufacturers.
7. Thick bubble: Generally, it is the bubble caused by the gas penetrating into the plastic during the processing of raw materials. In this case, the bubble is very loose and will damage the appearance, so this kind of bubble will become a defective product.
Large thick sheet blister process is very common in our lives.
I don't know if everyone understands the process of thick film blistering. In fact, although you may not know what it is about, products made by this process are very common in our daily life. The TV shell and fixed headphones we see The wire box is made of material, so it is very important.
In the specific manufacturing process of large thick sheet blister, its size should match the equipment, the design of the mold should be reasonable, and there should be no big difference between the two. This kind of product is mainly made by the equipment of the blister machine. There are two forming methods, one is manual, the other is mechanical equipment, and the efficiency of the latter is much higher than manual. Therefore, in a society with increasing modernization, equipment plays a very important role.
Secondly, the products made by this process have good heat preservation performance, strong coloring, and very easy to use, so when you need to use this type of product, you can achieve it through the thick sheet blister process.
All right, let's talk about it today. Thank you for watching.
Key words: Large thick sheet blister
Yangzhou Tuobo Plastic Industry Co., Ltd
E-mail:tuoboxisu@126.com
Address: Dinghuo Town, Jiangdu District, Yangzhou City
Mobile website QR code